Applications of our presence and motion detectors

Enlightening solutions
for every application

The installation options for our motion and presence detectors are diverse. Here we show you some application examples, each with a suitable recommendation of our detectors. For safe detector placement, we recommend the planning software from Relux and REDCAD.

We present these application examples to you:



 

Automatic lighting control for sanitary and ancillary rooms

TITLE_EN_GB does not exist

Toilets

The aim is the implementation of an automatic, motion-dependent lighting and ventilation of a restaurant toilet without any daylight. While the motion detector is activated by the PIR sensor, the integrated microphone indicates the shut-off delay.

  • Installation height: 1,2m / 3m
  • Width of the room: 3m
  • Room length: 6m

 

We recommend theMura S180-101 UP WH:

  • Thanks to the integrated microphone, it is ideal for toilets and sanitary facilities
Produkte thePiccola transparent 520x293

Alternative 1

For enclosed rooms, we recommend individual presence detectors for every room such as thePiccola P360-100 DE:

  • Circular 360° detection area, up to 8 m in diameter
Produkte LUXA 520x293

Alternative 2

We recommend for smaller rooms LUXA 103-100 UA with integrated microphone:

  • Circular 360° detection area, up to Ø 12 m
TITLE_EN_GB does not exist

Storage rooms

In a small storage room without windows, the light should go on automatically, as soon as someone enters the room, and – in order to save energy – should also go off after a defined time delay.

  • Installation height: 3m
  • Width of the room: 2,7m
  • Room length: 3,5m

 

Since there are no windows and thus no daylight comes in, a motion detector is sufficient. We recommend theMova S360-100 DE:

  • Large detection area of Ø 7 m at an installation height of 3 m
  • Reliable detection of all movements, as soon as the door opens
  • High protection rating: IP 54 (when installed)

 

 

 

Produkte theRonda S transparent 520x293

Alternative 1

If people stay longer in the room, we recommend theRonda S360-100 DE

Produkte theMura transparent 520x293

Alternative 2

When replacing a switch we recommend theMura S180-100 UP WH

Automatic lighting controlfor staircases without daylight

TITLE_EN_GB does not exist

Staircases

Automatic lighting of a staircase without windows in a car park is an absolute necessity.

  • Staircase height: 12m
  • Width of the stairscase: 7m

 

We recommend theMova P360-100 UP:

  • Large detection area of up to 24 m and reliable detection also from great heights up to 15 metres
  • High protection rating: IP 54 (when installed)

 

Produkte theRonda P 520x293

Alternative 1

For even more precise detection, we recommend theRonda P360-100 M UP:

  • High protection rating: IP 54 (when installed)
Produkte theMura transparent 520x294

Alternative 2

For wall mounting we recommend theMura S180-100 UP WH

Presence based lighting control for wet rooms

TITLE_EN_GB does not exist

Changing rooms

For reliable, presence-based lighting control in changing rooms with showers, a high protection class is absolutely essential. This is because presence and motion detectors in these kinds of facilities are at risk of being exposed to water.

  • Installation height: 2-4m
  • Width of the room: 10m
  • Room length: 2x 8m

We recommend theRonda S:

  • The detector has a circular detection area, which reliably and securely detects the walking movements in changing rooms
  • If someone is in the room only briefly, the light switches off again after 2 minutes, even if a longer time delay is set
  • High protection rating, at IP 54 (when installed) and therefore suitable for use in wet rooms
Produkte thePiccola transparent 520x294

Alternative 1

As alternative we recommend thePiccola

Produkte theRonda S transparent 520x294

Alternative 2

As alternative 2, we recommend theRonda S DE detector, also in a high-performance DALI version.

Presence-dependent lighting control for foyers, lobbies and entrance areas

TITLE_EN_GB does not exist

Entrance hall

In an entrance hall of 6 m height in an office building, the light is to be controlled based on presence.

  • Installation height: 3-6m
  • Width of the room: 12m
  • Room length: 24m

 

We recommend theRonda P:

  • The detector has a large, circular detection area, which reliably detects the walking movements in the hall from a great height
  • The detection area can be individually restricted with practical cover clips.
  • High performance DALI version
Produkte thePrema P 520x293

Alternative

For applications in hotel lobbies or company canteens, in which seated activities predominate and more subtle motions have to be detected, we recommend presence detectors, such as thePrema P. 

Also available as a high-performance KNX version.

Precise lighting control for corridors and escape routes

TITLE_EN_GB does not exist

Halls

A long hall with large windows requires automatic lighting. Opposite of the window fronts, there are office rooms with walls partly made of glass. The movements inside the offices should not influence the lighting control in the hall.

  • Width of the hall: 3m
  • Hall length: 56m

 

We recommend thePassa P:

  • Fewer detectors per area for coverage without gaps, thanks to a large, rectangular detection area of up to 30 m
  • The detection area is divided into 2 zones which can be activated/deactivated individually
  • The precise delimitation of the rectangular detection area to the adjacent rooms prevents movements from these spaces also being detected. In this way, the lighting in the corridor is only switched on when someone is actually in the corridor
  • Also available in high-performance DALI and KNX version

Presence-based lighting control for office spaces and workplaces

TITLE_EN_GB does not exist

Individual offices

Presence-based lighting and climate control of individual work spaces is required. It should be possible to switch the lighting on and off conveniently from the desk using a remote control. In case of short stays in the room, the lighting should be switched on no longer than two minutes, in order to save energy. Dynamic adjustment of the time delay to user behaviour is desirable.

  • Installation height: 3m
  • Width of the room: 5m
  • Room length: 4m

 

We recommend thePrema S:

  • Room coverage without gaps, thanks to the square detection area
  • Precise delimitation to the hall: open office doors and movements in the corridor do not trigger the detector in the office
  • Ventilation and climate control via presence channel
  • The "self learning time delay" function shortens or extends the switch-on time of the lighting based on the number of detected movements
  • 5 year warranty: thePrema stands out thanks to its top quality and reliability. And we give you our five-year warranty.
  • thePrema S has won several awards for its aesthetic design.
  • Also available as high-performance KNX version

 

Matching remote control: theSenda S

 

Sophisticated lighting management for large offices and halls

TITLE_EN_GB does not exist

Large offices

Sophisticated lighting management in a large office is required with light measurement at different spots – at the window front with incident daylight as well as on the dark side of the hall. Lighting in the entire office is switched on based on the measured lux values.

  • Installation height: 3m
  • Width of the room: 18m
  • Room length: 27m

 

We recommend thePrema P:

  • Room coverage without gaps, thanks to square detection area
  • Precise delimitation to the hall: open office doors and movements in the corridor do not trigger the detector in large offices
  • Ventilation and climate control via the presence channel
  • Mixed light measurement takes incident daylight into account
  • Combination of master/master and master/slave switching operations reduce the cost for devices and ensure optimum utilization of daylight
  • 5 year warranty thePrema stands out thanks to its top quality and reliability. And we give you our five-year warranty.
  • Also available as high-performance KNX version
Produkte Planospot transparent 520x293

Alternative

Alternative:
If the room layout changes more frequently, we recommend PlanoSpot with the manually adjustable detection area

  • Note: PlanoSpot is available as presence sensor DALI-2 or as KNX version.

Presence and brightness-dependent solutions for training, seminar and conference rooms

TITLE_EN_GB does not exist

Classrooms

In a classroom or seminar room, three DALI rows of light are required to be controlled independently of each other as well as presence- and brightness-dependent. Lighting scenarios to be called up via remote control are desired. Incident daylight is to be utilized as much as possible.

  • Installation height: 3m
  • Width of the room: 9m
  • Room length: 14m

 

We recommend theRonda P DALI:

  • Control of up to three lighting groups with a single DALI line
  • Convenient addressing and grouping of connected DALI lamps via button or via remote control
  • Flexible assignment of buttons to lighting groups after installation – without the need for complex changes to the wiring
  • Parallel master/slave switching optional for cost optimisation
  • Automatic configuration of new DALI operating devices using presence detector
  • Constant lighting control or switching mode can be switched over easily using the remote control.

 

Matching remote control: theSenda B

Field-dependent lighting for gyms, tennis and sports halls

TITLE_EN_GB does not exist

Sports hall

When entering the field in a sports hall, the light should go on automatically. Each of the three fields should be switched independently. One field is 21 metres wide and 30 metres long. The sports hall has large window fronts with incident daylight.

  • Installation height: 7m
  • Width of the room: 30m
  • Room length: 63m

 

We recommend theRonda P:

  • Also detects movements from heights of up to 15 m
  • High protection rating: IP 54 (when installed)
  • Only two detectors required per field thanks to the wide detection area of up to Ø 25m
  • Also available as high-performance KNX and DALI version
Produkte thePrema S transparent 520x293

Alternative

If a square detection area is required, thePrema P can also be used.

theSenda B

Remote control

Matching remote control theSenda B:

  • It can be used to optimally and conveniently set the detector and adjust its operation. Especially in sports halls with installation heights of 7 m and more – a real advan­tage for adjustments.

Motion-dependent lighting for logistics centres, libraries and archives

TITLE_EN_GB does not exist

Warehouses

Motion-based lighting of individual aisles in a warehouse is required. Forklifts or employees in the central aisle should not trigger the lighting in the cross aisles. The lighting of the cross aisles should only be switched on when they are entered.

  • Installation height: 6m
  • Width of the room: 40m
  • Room length: 88m

 

We recommend thePassa P:

  • Rectangular detection area specifically for hallways and warehouse aisles
  • Detection area with 2 detection zones, at 15 x 5 m (total 30 x 5 m), which can be switched on and off separately
  • The detectors can also be installed at heights of up to 6 m.
  • Only with thePassa KNX: Aura effect function, where the lighting is also switched on at a specific dimming value for the adjacent zones.