Function description

Passive infra-red presence detector KNX for ceiling installation in false ceilings
Square detection area 360°, 7 x 7 m, (49 m²) at mounting height 3 m
3 channels light and 2 channels presence
Automatic presence- and brightness-dependent control for lighting and HVAC
Two differently sized detection zones for greater flexibility. Adjustable via parameters or remote control.
Manual alignment of the detection area (swivel mechanism)
Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs
3 directed light measurements
2 light channels C1, C2 with 2 light measurements and additional lighting channel C3 without brightness factor
Switched or constant light control with 2 independent control systems and standby function (orientation light)

Switching mode with dimmable lighting
Fully or semi-automatic
Brightness switching value or set point value can be set in lux by using parameters, the object or via remote control
Teach-in of the brightness switching value or the set point value
Light time delay configurable
Self-learning time delay can be set using parameters, object or via remote control
Reduction of time delay when present briefly (short-term presence)
Manual override by telegram or remote control
2 presence channels C4, C5, individually configurable
Switch-on delay and time delay configurable
Room monitoring with selective movement detection
Setting the room correction factor for brightness measurement comparison
Configurable sensitivity
Extremely simple setting of the energy-saving ratio with the new «eco plus» function
Test mode for checking function and detection area
Scenarios
Parallel switching of multiple presence detectors (Master/Slave or Master/Master)
Installation in false ceilings with springs
Surface mounting on ceilings possible with the AP-frame (optional)
User remote control «theSenda S» (optional)
Management remote control «SendoPro» (optional)
Installation remote control «theSenda P» (optional)

Technical data

Installation height	2 - 3.5 m
Minimum height	1.7 m
Detection angle	360°
Type of connection	KNX bus terminal
Installation type	Ceiling mounting
Light switch-off delay	30 s - 60 min
Lamp types	Energy saving lamps, fluorescent lamps, Incandescent/halogen lamps, LEDs
Light measurement	Mixed light measurement
Presence switch-off delay	10 s - 120 min
Switch-on delay presence	10 s - 30 min / inactive
Ambient temperature	0°C ... 50°C
Detection range	49 m² (7 x 7 m)
Colour	White
Type of protection	IP 20

Tender text	DOC	PlanoSpot KNX (111,1 kB)
Hand book	PDF	KNX_HB_PlanoSpot (2,0 MB)
Operating instructions (Smartphone)	PDF	PlanoSpot KNX_mobil (1,1 MB)
Operating instructions	PDF	PlanoSpot KNX (1,0 MB)
KNX-Database (Single Product)	ZIP	KNX_DB_PlanoSpot (542,1 kB)
KNX overall database KNXprod	ZIP	KNXprod (22,1 MB)
Information Notice EU Data Act	PDF	PlanoSpot 360 KNX DE WH-Information Notice EU Data Act (58,9 kB)
Data sheet	PDF	PlanoSpot 360 KNX DE WH (1,0 MB)
Flyer	PDF	Flyer PlanoSpot KNX / KNX S (678,1 kB)
BIM data		Open planning data in web app