Theben training courses

Our practical training courses are mostly conducted in Haigerloch. Here the Theben products are developed, designed, and most of them are also produced in Haigerloch. But we also offer training courses all over the world.

If interested, please send an email to training-center@theben.de, contact our branch in your country or ask:

Webinar

International online seminar contents we offer in 2021

Our next international online seminar is on 24th of August 2021 at 8.30 AM  CEST

KNX sequences - simple to configurate - easy to practice

Demand to sequence controlled solutions, are increasing regularly, to pre-define processes and effects. With a multifunction sensor iON or a push button interface TA, the settings are done in a breath. Never the less if switched, dimmed, colour control and timeframes are desired to be set. No need of usage logic link controllers. We show how to operate! (Estimated time frame approx 60 min.)

24th of August 2021
at 8.30 AM CEST

KNX sequences - simple to configurate - easy to practice

Demand to sequence controlled solutions, are increasing regularly, to pre-define processes and effects. With a multifunction sensor iON or a push button interface TA, the settings are done in a breath. Never the less if switched, dimmed, colour control and timeframes are desired to be set. No need of usage logic link controllers. We show how to operate! (Estimated time frame approx 60 min.)

 

Appliances for the final practical demonstation: iON 108 KNX and/or TA 4 S KNX are used for the demo, to preset sequence according light, colour and time frames.

 

Target group: Planers, architects and system integrators  

 

Registration: https://attendee.gotowebinar.com/register/1040423189578094864

24th of September 2021
at 8.30 AM CEST

DALI room light control– DALI controller theRonda, simple to configure – powerfull in application and detection – App controlled

The light control nowadays in offices and class- and meeting rooms are meanwhile prefered  controlled with DALI light control or DALI management systems. During standard or simple operation, lights are controlled as a switched or controlled function according to the daylight all together, in a so called broadcast mode. But what if we’re forced to control the lights in several light groups?  For this application, you need a DALI controller. Sounds complicated and costly, but it isn’t!

With theben DALI theRonda presence sensor, you’re in the position to control up to 3 groups differently as a switched application according to the daylight, or as a controlled solution. Individual pushbuttons available in the market can be affilated directely to the controller of theRonda. We reduce the complexity and the time consuming installation and finally the costly installation accessories. We show how to operate! (Estimated time frame approx 60 min.)

 

Appliances for the final practical demonstation: theRonda DALI

 

Target group: Planers, architects and system integrators  

 

Registration: https://attendee.gotowebinar.com/register/1969180661561624846

03th of November 2021
at 8.30 AM CEST

Color light control – App controlled? with theben iON 108 KNX room controller;  yes, we can!

Meanwhile regardless of if in private properties or in commercial buildings the demands for controllable colored or tunable lights is increasing.

For this purpose, LED lights and their drivers and as well a reasonable powerful control panel, is finally required. App controlled? Why not! We show how to operate! (Estimated time frame approx 60 min.)

 

Appliances for the final practical demonstation: iON 108 KNX, LED RGBW, LED CW-WW

 

Target group: Planers, architects and system integrators  

 

Registration:  https://attendee.gotowebinar.com/register/1708952647546755087

10th of November 2021
at 8.30 AM CEST

KNX RF secure – retrofitting or extending of a existing project via RF

Whenever the KNX bus cable is not available or reachable, to extend a building structure, you’ll appreciate RF KNX components and their solution.

No disadvantage at all, if exactly these components are working safely according the KNX secure standards. We are sharing insights to the positioning of RF components, and how to integrate them safely into an existing project. Like usual, at the end of the webinar we will practice. We show how to operate! (Estimated time frame approx 60 min.)

 

Appliances for the final practical demonstation: KNX RF switching-, dimming-, shading- and heating actuators, and iON room controller

 

Target group: Planers, architects and system integrators  

 

Registration:   https://attendee.gotowebinar.com/register/5461166919216463373

15th of November 2021
at 8.30 AM CEST

 

Automized blinds control KNX - sun tracking at it’s best

A automatized shading control according to a preset brightness threshold is meanwhile standard and required for smarter homes. The most efficient shading control is shading control with sun tracking. Whenever and wherever the sun effects the facade of a building, we will position the blinds automatically, in the most efficient way. We keep blinds open as much as the current position of the sun allows us without dazzling, but we close the blinds that much to keep the sun and their temperature impact apart from the room. Highly comfortable, highly energy efficient. This sounds time consuming and sophisticated. We show how to operate! (Estimated time frame approx 60 min.)

 

Appliances for the final practical demonstation: KNX JM 4 T KNX blinds actuator, Meteodata weatherstation

 

Target group: Planers and system integrators  

 

Registration:    https://attendee.gotowebinar.com/register/2546782706935881227

22nd of November 2021
at 8.30 AM CEST

 

With KNX current measurement and reacting – automated lock function in case of overload

Current measurement is fundamental feature if energy data are required for monitoring functions. Theben KNX actuator have this function available for each channels separately, and also switch off automatically in case of exceeding of a predefined defined threshold. How cool is this! We show how to operate! (Estimated time frame approx 60 min.)

 

Appliances for the final practical demonstation: KNX C-load actuators, iON 108 KNX room controller

 

Target group: Planers and system integrators  

 

Registration:    https://attendee.gotowebinar.com/register/5108619510886766603

Recordings

Missed the appointment? No problem! Here you can find all online training courses and seminars as recordings.

Elmar Löffler

Elmar Löffler
Head of Technical Support

Hohenbergstraße 32
72401 Haigerloch

Phone: +49 (0)7474/ 692-208
Fax: +49 (0)7474/ 692-150

elmar.loeffler@theben.de

Veronika Pieper

Veronika Pieper
Application and registration

Hohenbergstraße 32
72401 Haigerloch

Phone: +49 (0)7474/ 692-108
Fax: +49 (0)7474/ 692-253

veronika.pieper@theben.de

Christoph Kienzle

Christoph Kienzle
Technical trainer

Hohenbergstraße 32
72401 Haigerloch

Phone: +49 (0)7474/692-109
Fax: +49 (0)7474/692-150

christoph.kienzle@theben.de