Our intelligent lighting control

Selection matrix

Which detector for which application?

Seated activities or little motion

Ceiling installation

Switching mode Dimming mode

thePiccola S/P

  •  Circular detection area 360°, up to Ø 8 m (50 m²)

 

theRonda S/P

  • Circular detection area 360°, up to Ø 24 m (452 m2² (theRonda P)
  • Circular detection area 360°, Ø 8 m, (50 m²) (theRonda S)

 

thePrema S/P

  • Square detection area 360°

 

thePassa P

  • Corridor detector

theRonda S/P DALI

  • This device provides information about presence and brightness in the form of a DALI telegram in line with IEC 62386 Part 303/304

 

theRonda Sensor DALI-2

  • DALI-2 certification
  • Circular detection area 360°, Ø 24 m, (452 m²)

 

thePassa P DALI

  • Corridor detector with DALI certification

 

thePassa Sensor DALI-2

  • DALI-2 certification
  • Rectangular detection area 360°, 30 x 4,5 m, (135 m2) at mounting height 3 m, for corridors and storage areas, with 2 individually connectable and disconnectable detection zones

Seated activities or little motion

Wall mounting

theMura

  • 2-wire and 3-wire motion/presence detectors with integrated button
  • Can be used for all standard switch ranges

 

PresenceLight 180

  • Half-round detection area 180°, Ø 16 m (100 m²)

Walking motion, little daylight

Ceiling installation

theMova S

  • Circular detection area 360°, Ø 8 m, (50 m²)
  • remote-controllable

 

theMova P

  • Circular detection area 360°, Ø 24 m, (452 m²)
  • optional remote-controle available

 

thePiccola S

  • Circular detection area 360°, Ø 8 m, (50 m²)

 

LUXA 103-100 UA

  • Circular detection area 360°, Ø 12 m, (113 m²)

Our products

Produkte theRonda P 520x294

theRonda P360-100 M UP WH

  • Passive infra-red presence detector for flush-mounted ceiling installation
  • Circular detection area 360°, up to Ø 24 m (452 m²) at mounting height 3 m
  • 1 channel light (Relay, 230 V)
Show more
Produkte theRonda PDALI 2 520x293

theRonda P360 DALI-2 S UP WH

  • Passive infra-red presence sensor for flush-mounted ceiling installation, DALI-2 certified
  • Circular detection area 360°, Ø 24 m, (452 m²) at mounting height 3 m
  • This device provides information about presence and brightness in the form of a DALI telegram in line with IEC 62386 Part 303/304
Show more
Produkte theRonda P 520x295

theMova P360-100 UP WH

  • Passive infra-red motion detector for flush-mounted ceiling installation
  • Circular detection area 360°, up to Ø 24 m (452 m²) at mounting height 3 m
  • 1 channel light (Relay 230 V)
Show more
Produkte thePrema S transparent 520x294

thePrema S360-100 E UP WH

  • Passive infra-red presence detector for flush-mounted ceiling installation
  • Square detection area 360°, 7 x 7 m, (49 m²) at mounting height 3 m
  • 1 channel light (Relay, 230 V)
Show more
Produkte thePrema Multi transparent 520x293

thePrema P360 KNX AP Multi WH

  • Multi-sensor KNX
  • Consisting of passive infra-red presence detector KNX and air quality sensor KNX (= 2 bus participants)
  • Functions air quality sensor
Show more
Produkte theMura transparent 520x295

theMura S180-100 UP WH

  • Passive infra-red motion detector for wall installation
  • Square detection area 170°, 14 x 17 m (238 m²)
  • 1 channel light
Show more
Produkte theLuxa S180 transparent 520x293

theLuxa S180 WH

  • Passive infra-red motion detector
  • For outdoor use
  • Additional creep under protection
Show more
Produkte theLuxa P300 transparent 520x293

theLuxa P300 WH

  • Motion detector (PIR)
  • Automatic lighting control based on presence and brightness
  • 300° detection angle
Show more
Produkte theLuxaS360 transparent 520x293

theLuxa S360 WH

  • Passive infra-red motion detector
  • For outdoor use
  • For installation on walls and ceilings
Show more

You can find all our presence and motion detectors here.

All functions at a glance

Motion and presence detectors

 

Simple and efficient: Practical advantages of presence detectors

Due to their very fine sensor technology, Theben presence detectors detect even the smallest movements and temperature differences. This allows you to adjust lighting and air conditioning to the exact needs of residents and users. Depending on the model, the various presence detectors are available in black, white, grey, silver or in special colours upon request.

Square detection area

The square detection area is ideal for most rooms in which presence detectors are used. So individual detectors can be placed in the perfect locations without any blind spots, gaps or unnecessary overlaps. This makes planning easier, reduces the installation effort, saves energy and lowers costs because, due to the square detection area, fewer detectors are required in most cases.

Self-learning time delay

The time delay changes automatically depending on people's habits in the room. If the presence detector detects more movement, the time delay is shortened to as little as two minutes. If people hardly move or only rarely, the time delay is increased to up to 20 minutes. This saves energy, boosts comfort and allows people to work in the way that suits them: active and lively or still and focused.

Sensitive room monitoring

A presence detector misses nothing. This is a particular advantage when the presence detector is integrated in the building system technology of large office or administration buildings. In this way the building management always know which rooms people are still working in.

Safe staircase light function

With presence detectors, nobody trips up – especially not on the stairs. The light can be switched on using the button, but it only goes off when there is no more movement on the stairs. This means that someone who is at the top of the stairs is not suddenly left in the dark because someone at the bottom has switched off the light.

Illuminating short stays

In the event of a short stay,the light is only on for two minutes. Because presence detectors can detect whether and how long someone is in the room, whoever enters the room for a short period of time does not automatically trigger the time delay that has been set, but still does not have to go without light.

Custom lighting scenarios

Bright daylight or softly dimmed light – you can choose between two lighting scenarios, which you can define according to how the mood takes you. For example, in conference rooms where the light has to be dimmed for presentations. For the very lighting arrangements required in everyday situations. Settings can be made, saved and changed quickly and easily using the remote control.

Easy-to-use remote control

With a remote control, settings can be easily made and changed from the ground up. This is faster, shortens the installation time and lowers costs. And, what's more, it's safer.

Easy-to-use remote control

With a remote control, settings can be easily made and changed from the ground up. This is faster, shortens the installation time and lowers costs. And, what's more, it's safer.

Easy-to-use remote control

With a remote control, settings can be easily made and changed from the ground up. This is faster, shortens the installation time and lowers costs. And, what's more, it's safer.

Constant lighting control

Some versions have constant lighting control, which continuously compares artificial light and daylight. It determines the desired brightness value from these two light sources. No matter how fickle the weather, the lighting conditions inside the room remain pleasantly constant.

Practical pulse function

The pulse function allows the presence detectors to be built into existing electrical installations with staircase light timer switches or KNX binary inputs without the need for expensive adjustments.

Intelligent parallel switching

Presence detectors allow for more than just increasing the detection area via master/slave switching operations. Via master/master/parallel switching operations, the lighting conditions can be set in the detection area of individual devices independently, and thus individually. This is an advantage if, for instance, in open-plan offices, different lighting conditions are to be balanced between areas close to windows and the room's interior.

Clever teach-in function

Lighting conditions change quickly – all the better if you can simply save them when they are exactly how you want them to be. The clever teach-in function allows even end users to save the current lux value for future use, without the need for specialist knowledge. It couldn't be easier.

Configurable sensitivity

How sensitively presence detectors respond to movements inside the room is up to you. The PIR sensors can be conveniently set using the remote control – according to the individual requirements of the users.

Most simple energy saving setting

The "eco" label stands for ideal control options, while "eco plus" stands for maximum energy savings. You decide what is best for you at the push of a button. Exactly how you like it. Exactly how you need it. There's no easier way to save energy.

Suitable for wet rooms

Presence and motion detectors with protection class IP 54 can also be used in wet rooms such as showers, changing rooms or toilets.

High switching capacity

Presence and motion detectors from Theben have a high-performance relay with tungsten pre-contact or a zero-cross switching and can thus handle switch loads of up to 10 amperes. This allows several lamps to be connected at the same time and larger areas, such as loading ramps or hotel premises, to be lit. This gives you peace of mind during planning, lowers costs and reduces installation times.

Perfectly versatile: theMura 2 and 3-wire motion and presence detectors

TITLE_EN_GB does not exist

Versatility can be so attractive & clever

theMura wall detector is perfect for energyefficient lighting control, e. g. in corridors, stairways, cellars and toilets – available as a motion or presence detector. The 2-wire detectors are most suitable for renovations and conversions in combination with a staircase light timer switch from Theben. The 3-wire detectors can also be used in new buildings and feature practical additional functions as a presence detector.

Thanks to the sleek design, they are strikingly discreet from every angle. They can also be used for any standard switch range thanks to the wide portfolio of available accessory sets. Simply clever. Simply beautiful. Simply Theben.

 

Practical advantages of theMura motion and presence detectors

Two in one: with integrated button

The lighting can be switched on and off manually using the integrated button. If this function is not required, it can simply be deactivated.

Completely safe: staircase light function

With theMura, nobody trips up. Not even on the stairs. The light can be switched on using the button, but it only goes off when there is no more movement on the stairs. This prevents someone from being suddenly left in the dark because someone else has switched off the light.

Clever: teach-in function

Lighting conditions change quickly – so it’s good when you can simply save them when they are exactly how you want them. The current lux value can be permanently saved using the teach-in function. Without specialist knowledge. By the end user. It couldn’t be easier.

Practical advantages of theMura presence detectors

Leading the way: orientation light

The orientation light ensures increased safety in corridors and stairways. After the automatic switch-off of the main light, it remains activated for an adjust­able run-on time or permanently (depending on the brightness levels). Be on the safe side.

Listen up: acoustic function

In rooms such as toilets, it may make sense to let the noise level decide whether the light should be switched off. With theMura, the integrated microphone can also be used to specify the run-on time. Completely practical.

Remote operation: via remote control and the app

In order to use all of the functions, theSenda B remote control needs to be used in combination with the free theSenda Plug app.

TITLE_EN_GB does not exist

Highlights at a glance

  • Attractive, sleek design
  • Large detection area of 14 x 17 m
  • Flexible expansion thanks to master/slave
  • Integrated button (can be deactivated)
  • The accessory sets make theMura the perfect option for the currently used switch range


 

The lighting control dream team

Presence detectors and presence sensors DALI-2

Presence detectors from Theben are the perfect solution for presence-dependent and efficient lighting control. With a detection area of up to nine metres, theRonda S standard presence detectors are especially well suited to smaller offices, ancillary rooms with daylight and wet rooms. The P performance range of the theRonda detectors really come into their own in environments such as open-plan offices and classrooms, thanks to a detection area of up to 25 m and Master/Master parallel switching.

theRonda DALI presence detectors now combine all the advantages of the DALI bus system with the legendary standards of premium quality delivered by Theben – all wrapped up in an intelligent, efficient and flexible package. They can also be connected to conventional buttons. Customers can select freely from all common switch ranges and enjoy maximum freedom of design.

The assignment of the buttons to individual lighting groups can be changed without any problem, even after installation. This does away with the need to make complex adjustments to the wiring. With theRonda DALI presence detectors, up to three lighting groups can be controlled using just one DALI line – saving you significant amounts of time and money during installation. If a DALI operating device needs to be replaced and a new one is installed, the presence detector identifies the new one automatically and performs configuration itself.



 

Convenient operation: Theben remote controls make it possible

Fernbedienung theSenda B 520x293

theSenda B

  • Remote control for communication of theSenda Plug App with the detectors
  • Functions remote control theSenda B:
  • Universally applicable remote control for many indoor and outdoor detectors
Show more
Fernbedienung theSenda P 520x293

theSenda P

  • Service remote control
  • ON/OFF
  • Teach-In function for teaching in the current brightness value
Show more
Fernbedienung theSenda S 520x293

theSenda S

  • User remote control
  • ON/OFF
  • Automatic
Show more