Name: thePixa P360 KNX UP WH
Brand: Theben products
SKU: 2269200

Optical presence detector for ceiling installation
KNX Data Secure
Rectangular detection area with up to 6 flexible detection zones (Total area 11.0 x 15.5 m │171 m²; at 4.5 m installation height)
Restriction of the detection area via app (thePixa Plug)
Automatic presence and brightness-dependent control for lighting and HVAC
Each detection zone has its own light measurement
Adjustment of brightness measurements via thePixa Plug app
Configurable sensitivity of sensor
Distinction between motion and presence
Parallel switching of multiple presence detectors (Master/Slave or Master/Master)

Test mode for checking function and detection area via app (thePixa Plug)
Output of occupancy rate and occupancy density via telegram
Integrated temperature sensor
Ceiling installation in flush-mounting box (2-point fixing)
Surface mounting on ceilings possible with surface frame (option)
thePixa Plug app for settings and evaluations (iOS/Android)
KNX firmware update possible (ETS app)
Sensor firmware update possible (thePixa Plug app)
6 channels light, Z1 light – Z6 light:
Switching or constant lighting control with 6 independent control systems and standby function (orientation light)
Switching mode with dimmable lighting
Free switch object with configuration type switching
Fully or semi-automatic device
Brightness switching value configurable in lux by using parameters
Brightness switching value configurable in lux by using parameters and telegram
Light time delay configurable by using parameters
Aura effect for better orientation and greater safety
Manual override by telegram
6 channels HKL, Z1 HKL – Z6 HKL:
Configurable switch-on delay and time delay
Sending of operating mode
Separate block telegram
6 channels room occupancy, Z1 room occupancy – Z6 room occupancy:
Output of number of persons
Control of a fan with up to 3 stages
3 configurable thresholds (threshold switch)

Operating voltage	230 – 240 V AC
Frequency	50 Hz
Stand-by consumption	≤1.6 W
Installation height	2.5 – 4.5 m
Minimum height	≥ 2,5 m
Measuring range brightness	5 – 3000 lx
Type of connection	Terminal screws \| Bus connection: KNX bus terminal
Installation type	Flush-mounted
Light switch-off delay	0 s – 60 min
Light measurement	Mixed light measurement
Switch-on delay presence	0 s – 120 min / inactive
Ambient temperature	-5°C ... 45°C
Colour	White
Setting range temperature	-15°C ... 60°C
Type of protection	IP 20

Item no. 9070992

To the product Data sheet

Item no. 9070816

To the product Data sheet