Name: PIRA TO AP AN
Brand: Theben
SKU: 1030226

Function description

Passive infra-red motion detector for wall installation
180° detection angle, 10 m at 2 m mounting height
For outdoor use
Adjustable brightness switching value and switch-off delay
Mixed light measurement
Instant start-up possible via factory preset
Wiring also possible with 2 x 2.5 mm² conductors.
Permanent light measurement: PIRA T series can switch off the light when sufficient natural light is available. Even if someone is always moving in the detection area.
Optimized for LED: Reliable switching of connected LED loads thanks to integrated zero-crossing circuit.
sensNORM certified detection range, tested according to the stringent Theben requirements with 40,000 switching cycles.

With wall mounting, the area directly under the detector is also covered. This prevents uninvited guests from approaching unnoticed without being in the ‘spotlight’.
Exit-On: When installed directly above a door, the PIRA TO thanks to its ‘downward view’, the PIRA TO immediately detects every person who steps through the door.
For entrance areas, exits, driveways, garages/carports

Technical data

Operating voltage	230 V AC
Frequency	50 Hz
Stand-by consumption	< 0,5 W
Light measurement	Mixed light measurement
Number of channels	1
Colour	Anthracite (similar to RAL 7016)
Installation type	Wall installation, Surface mounted
Detection angle	180°
Installation height	2,5 m
Switching output	Light
Incandescent/halogen lamp load	1000 W
LED lamp 2-8 W	200 W
LED lamp > 8 W	200 W
Lamp types	Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs
Detection range	10 m
Detection Area	Semicircular
Ambient temperature	-20°C ... 40°C
Protection class	II
Type of protection	IP 55
GWP Cradle-to-Gate (A1-A3)	3.11 kg CO₂ eq
GWP Cradle-to-Grave (A1-C4)	19.4 kg CO₂ eq