PresenceLight 360

Description

Presence detector (PIR)
Square detection area
Ceiling mounted
The square detection area allows accurate and simple planning
Mixed light measurement
Light switch output (relay, 230 V)
Automatic lighting control
Lighting control with light threshold value and self-learning switch-off delay
Pulse function for staircase time switch
Can be configured remotely
The switching behaviour of the presence detector is controlled by presence and light
The self-learning switch-off delay adjusts to occupants' behaviour
The pulse function is for controlling a staircase time switch
The presence detector has a mixed light measurement and is suitable for switching the following types of lamp: Fluorescent lamps (FL/PL), halogen and incandescent lamps as well as LEDs
Test operation mode checks the detection area and installation
The parameters can either be set using the potentiometer or via the optional service remote control QuickSet plus

	PresenceLight 360
Operating voltage	230 V AC
Frequency	50 Hz
Recommended installation height	2 – 3 m
Installation type	Ceiling installation
Stand-by consumption	0,7 W
Light measurement	Mixed light measurement
Setting range brightness	10 – 1500 lx
Light switch-off delay	Impuls (0,5 s), 10 s-20 min
Type of contact light	Relay 230 V
Lamps	Incandescent/halogen lamps, Fluorescent lamps, Energy saving lamps, LEDs
Resistive load	1400 W
Incandescent/halogen lamp load	1200 W
Compact and flourescent lamps	960 VA (cos f = 0,8), 580 VA (cos f = 0,5)
Compact and flourescent lamps (Number of electronic ballasts)	10 x (1 x 58 W), 5 x (2 x 58 W), 16 x (1 x 36 W), 8 x (2 x 36 W), 16 x (smaller than 36 W)
Type of connection	Screw terminals
Max. cable cross section	2 x 2,5 mm²
Mounting plate	70 x 70 mm
Size of concealed housing	Ø 55 mm (NIS, PMI)
Ambient temperature	-20 °C … +50 °C
Type of protection	IP 54