| Antenna top2 RC-GPS- Worldwide time synchronisation and positioning via receiving GPS satellite signal. The antenna is connected by a 2 wire cable (max. 100 m) to Theben top2 RC devices (up to 5 devices can be connected depending on device type). A top2 GPS power unit (item number 907 0 892) is also required when connecting to TR 611 top2 RC, LUNA 121 top2 RC, LUNA 122 top2 RC or SELEKTA 171 top2 RC devices. No additional power un it is required when connecting to TR 641 top2 RC, TR 642 top2 RC, TR 644 top2 RC devices or several devices to one antenna. Positioning is only possible when connecting to TR 641 top2 RC, TR 642 top2 RC, TR 644 top2 RC and SELEKTA 171 top2 RC devices. Can not be used with TR 611 top2 RC 24 V and SELEKTA 171 top2 RC 24V
|
| Antenna DCF77 KNX- Radio control via antenna with KNX time switches: To ensure good reception, do not install the antenna in cellars or on distribution boxes. Connection is made via separate 2-wire, unscreened high-voltage power cable (max. 100 m), up to 10 Theben top2 RC devices can be connected. Polarity, short-circuit and interruption of the antenna circuit are each visually displayed to help with installation.
|
| Antenna top2 RC-DCF- Radio control via antenna with top2 RC devices: To ensure good reception, do not install the antenna in cellars or on distribution boxes. Connection is made via separate 2-wire, unscreened high-voltage power cable (max. 100 m), up to 10 Theben top2 RC devices can be connected. Polarity, short-circuit and interruption of the antenna circuit are each visually displayed to help with installation.
|
| Antenna RAMSES 813/833- For 868 MHz with wall holder and 2 m screened connection cable (only required in event of poor reception quality)
|
| Power unit top2 GPS- Required when connecting the antenna top2 RC-GPS to an individual TR 611 top2 RC, LUNA 121 top2 RC, LUNA 122 top2 RC or SELEKTA 171 top2 RC device (No additional power unit is required when connecting to a minimum of 2 devices)
- Operating voltage: 230 V AC
- Width: 2 modules
|
| PC set OBELISK KNX - OBELISK KNX memory card 16 K, RS 232 plug-in adapter, software
|
| PC set OBELISK top2- Switching programs created on the PC by means of the convenient OBELISK top2 software can be transferred via USB interface to the OBELISK top2 memory card and from the card to the time switch and vice versa. Thus no PC or laptop is required on-site. Programming and the program printout can be done comfortably from the desk
- For Windows XP/Vista/7/8 (32/64 Bit)
- Consisting of: Memory card, USB plug adapter, software
|
| Memory card OBELISK KNX 16 K |
| Memory card OBELISK top2 |
| Memory card OBELISK |
